ZyXEL Communications P-660HN-T1H User Manual
Chapter 5 Internet and Wireless Setup Wizard
P-660HN-T1H User’s Guide
68
Note: The wireless stations and ZyXEL Device must use the same SSID, channel ID
and WEP encryption key (if WEP is enabled), WPA-PSK (if WPA-PSK is
enabled) for wireless communication.
enabled) for wireless communication.
4
This screen varies depending on the security mode you selected in the previous
screen. Fill in the field (if available) and click Next.
screen. Fill in the field (if available) and click Next.
5.3.1 Manually Assign a WPA-PSK key
Choose Manually assign a WPA-PSK key in the Wireless LAN setup screen to
set up a Pre-Shared Key.
set up a Pre-Shared Key.
Figure 24 Manually Assign a WPA-PSK key
The following table describes the labels in this screen.
Next
Click this to continue to the next wizard screen.
Exit
Click this to close the wizard screen without saving.
Table 13 Wireless LAN Setup Wizard 2
LABEL
DESCRIPTION
Table 14 Manually Assign a WPA-PSK key
LABEL
DESCRIPTION
Pre-Shared
Key
Key
Type from 8 to 63 case-sensitive ASCII characters. You can set up the most
secure wireless connection by configuring WPA in the wireless LAN screens.
You need to configure an authentication server to do this.
secure wireless connection by configuring WPA in the wireless LAN screens.
You need to configure an authentication server to do this.
Back
Click this to return to the previous screen without saving.
Next
Click this to continue to the next wizard screen.
Exit
Click this to close the wizard screen without saving.