ZyXEL Communications P-660HN-T1H User Manual
Chapter 5 Internet and Wireless Setup Wizard
P-660HN-T1H User’s Guide
69
5.3.2 Manually Assign a WEP Key
Choose Manually assign a WEP key to setup WEP Encryption parameters.
Figure 25 Manually Assign a WEP key
The following table describes the labels in this screen.
5
Click Apply to save your wireless LAN settings.
Figure 26 Wireless LAN Setup 3
Table 15 Manually Assign a WEP key
LABEL
DESCRIPTION
Key
The WEP keys are used to encrypt data. Both the ZyXEL Device and the
wireless stations must use the same WEP key for data transmission.
wireless stations must use the same WEP key for data transmission.
Enter any 5 or 13 ASCII characters, or 10 or 26 hexadecimal characters
("0-9", "A-F") for a 64-bit or 128-bit WEP key respectively.
("0-9", "A-F") for a 64-bit or 128-bit WEP key respectively.
Back
Click this to return to the previous screen without saving.
Next
Click this to continue to the next wizard screen.
Exit
Click this to close the wizard screen without saving.