ZyXEL Communications P-335WT User Manual

P-335 Series User’s Guide

Chapter 5 Wireless LAN (P-335WT)

100

Figure 48   OTIST Start

Note: The process takes three minutes. During this time the Prestige assigns its 
security settings to OTIST-enabled wireless clients within range that have selected to 
associate with this Prestige.

Figure 49   OTIST Process

When the previous screen closes, your current Prestige security configuration is automatically 
saved to the wireless clients.

Note: See your wireless client documentation for information on enabling OTIST on it. 
If there are multiple OTIST-enabled Prestiges within range and with the same OTIST 
setup key, then the wireless client must choose which Prestige should assign its 
settings to it.

Use the OTIST button to set up OTIST using the current OTIST Setup Key and the Prestige’s 
current wireless security settings.

1 Log out of your current configuration management session.

2 Push the OTIST button once on the back panel of the Prestige device to enable OTIST.

The MAC filter screen allows you to configure the Prestige to give exclusive access to up to 
32 devices (Allow ) or exclude up to 32 devices from accessing the Prestige (Deny ). Every 
Ethernet device has a unique MAC (Media Access Control) address. The MAC address is 
assigned at the factory and consists of six pairs of hexadecimal characters, for example, 
00:A0:C5:00:00:02. You need to know the MAC address of the devices to configure this 
screen.

To change your Prestige’s MAC filter settings, click the Wireless LAN link under Network 
and then the MAC Filter tab. The screen appears as shown.