ZyXEL Communications P-335WT User Manual

P-335 Series User’s Guide

Chapter 5 Wireless LAN (P-335WT)

98

OTIST (One-Touch Intelligent Security Technology) allows your Prestige to set the wireless 
client to use the same wireless settings as the Prestige. 

Note: The wireless client must support OTIST and have OTIST enabled. 

The following are the wireless settings that the Prestige assigns to the wireless client if OTIST 
is enabled on both devices and the OTIST setup keys are the same. 

• SSID 
• Security (WEP or WPA-PSK) 

Note: This will replace the pre-configured wireless settings on the wireless clients.

Click the Wireless LAN link under Network and then the OTIST tab. The following screen 
displays.

Shared Secret

Enter a password (up to 31 alphanumeric characters) as the key to be shared 

between the external authentication server and the Prestige.
The key must be the same on the external authentication server and your 

Prestige. The key is not sent over the network.

Accounting Server

Active

Select Yes from the drop down list box to enable user accounting through an 

external authentication server.

 IP Address

Enter the IP address of the external accounting server in dotted decimal notation.

Port Number

Enter the port number of the external accounting server. The default port number 

is 1813. 
You need not change this value unless your network administrator instructs you 

to do so with additional information. 

Shared Secret

Enter a password (up to 31 alphanumeric characters) as the key to be shared 

between the external accounting server and the Prestige.
The key must be the same on the external accounting server and your Prestige. 

The key is not sent over the network. 

Apply

Click Apply to save your changes back to the Prestige.

Reset

Click Reset to reload the previous configuration for this screen.

Table 36   Wireless: 802.1x and No WEP