ZyXEL Communications 1001H User Manual
P100IH ISDN Router
System Maintenance
11-13
Figure 11-13 Successful Backup
11.5 Restore Configuration
Select option 6 from Menu 24 - System Maintenance to restore the configuration from your workstation to
the Prestige. Again, you must use the console port and XMODEM protocol to restore the configuration.
the Prestige. Again, you must use the console port and XMODEM protocol to restore the configuration.
Rest assured that the configuration is stored in the flash ROM in the Prestige, so even if power failure
should occur, your configuration is safe.
should occur, your configuration is safe.
Step 1.
Go to Menu 24.6 (shown next).
Figure 11-14 Restore Configuration
Step 2.
Press “Y” to indicate that you want to continue.
The following procedure is for the HyperTerminal program. The procedure for other serial communications
programs should be similar. Run the HyperTerminal program.
programs should be similar. Run the HyperTerminal program.
Step 3.
Click “Transfer”, then “Send File” to display the following screen.
Figure 11-15 HyperTerminal Screen
Step 4.
Enter where the rom configuration file is on your computer, and make sure you choose the X-
Modem Protocol. Then press “Send”.
Modem Protocol. Then press “Send”.
** Backup Configuration completed. OK.
### Hit any key to continue.###
### Hit any key to continue.###
Ready to restore Configuration via Xmodem.
Do you want to continue (y/n):
Do you want to continue (y/n):
Choose the
X-Modem
Protocol.
X-Modem
Protocol.
Enter where the rom
configuration file is on your
computer.
configuration file is on your
computer.