ZyXEL Communications 1001H User Manual
P100IH ISDN Router
11-14
System Maintenance
Step 5.
After a successful restoration you will see the following screen. Press any key to return to reboot
the system.
Figure 11-16 Successful Restoration
Keep in mind that the configuration is stored in the flash ROM in the Prestige, so even if power failure
should occur, your configuration is safe.
should occur, your configuration is safe.
11.6 Firmware Upload
Menu 24.7 -- System Maintenance - Upload Firmware
allows you to upgrade the firmware and the
configuration file via the console port. The firmware and configuration file may also be uploaded via FTP.
There are 2 components in the system: the router firmware and the configuration file, as shown in the next
figure. Restoring the configuration as in menu 24.6 copies your (customized) backup configuration from
your computer to the Prestige. Note you must be able to access the SMT to do this. Uploading the
configuration file via menu 24.7.2 on the other hand rewrites all configuration data, as well as system-
related data, the error log and the trace log. If you forget your password for instance (see section 2.7.1) you
will need to use menu 24.7.2 as you can use this method in debug mode. However, your customized
settings will be reset to the default values (including your password being reset to 1234, the Prestige default
password).
There are 2 components in the system: the router firmware and the configuration file, as shown in the next
figure. Restoring the configuration as in menu 24.6 copies your (customized) backup configuration from
your computer to the Prestige. Note you must be able to access the SMT to do this. Uploading the
configuration file via menu 24.7.2 on the other hand rewrites all configuration data, as well as system-
related data, the error log and the trace log. If you forget your password for instance (see section 2.7.1) you
will need to use menu 24.7.2 as you can use this method in debug mode. However, your customized
settings will be reset to the default values (including your password being reset to 1234, the Prestige default
password).
Figure 11-17 Menu 24.7 - System Maintenance - Upload Firmware
11.6.1
Upload Router Firmware
The firmware is the program that controls the functions of the Prestige. Menu 24.7.1 shows you the
instructions for uploading the firmware. If you answer yes to the prompt, the Prestige will go into debug
mode. Follow the procedure below to upload the firmware:
instructions for uploading the firmware. If you answer yes to the prompt, the Prestige will go into debug
mode. Follow the procedure below to upload the firmware:
Step 1.
Enter “atur” after the “Enter Debug Mode” message.
Step 2.
Wait for the “Starting XMODEM upload” message before activating Xmodem upload on
your terminal.
your terminal.
Save to ROM
Hit any key to start system reboot.
Hit any key to start system reboot.
Menu 24.7 -- System Maintenance - Upload Firmware
1. Upload Router Firmware
2. Upload Router Configuration File
2. Upload Router Configuration File
Enter Menu Selection Number: