ZyXEL Communications ZyXEL G-560 User Manual

ZyXEL G-560 User’s Guide

Chapter 3 Introducing the Web Configurator

39

Figure 15   Status Screen

Click SETUP WIZARD to help 

you configure your G-560 to set 

up a wireless network.

Use the submenus under SETTINGS 

to configure advanced G-560 

features.

Click LOGOUT at 

any time to exit the 

web configurator.

Note: See the rest of this User's Guide for configuration details and background 

information on all G-560 features using the web configurator.

The wizard consists of a series of screens to help you configure your G-560 for wireless 
stations to access your wired LAN. 

Use the following buttons to navigate the Wizard:

Back

Click Back to return to the previous screen.  

Next

Click Next to continue to the next screen. 

No configuration changes will be saved to the G-560 until you click Finish.

Click SETUP WIZARD to display the first wizard screen shown next. Refer to the System 
Screens chapter for more background information.

1 Enter a descriptive name to identify the G-560 in the Ethernet network.

2 Select Obtain IP Address Automatically if you want to put the G-560 behind a router 

that assigns an IP address. If you select this by mistake, use the RESET button to restore 
the factory default IP address. 

3 Select Use fixed IP Address to give the G-560 a static IP address. The IP address you 

configure here is used for management of the G-560 (accessing the web configurator).