ZyXEL Communications ZyXEL G-560 ユーザーズマニュアル
ZyXEL G-560 User’s Guide
Chapter 3 Introducing the Web Configurator
39
Figure 15 Status Screen
Click SETUP WIZARD to help
you configure your G-560 to set
up a wireless network.
Use the submenus under SETTINGS
to configure advanced G-560
features.
Click LOGOUT at
any time to exit the
web configurator.
Note: See the rest of this User's Guide for configuration details and background
information on all G-560 features using the web configurator.
3.3 Configuring the G-560 Using the Wizard
The wizard consists of a series of screens to help you configure your G-560 for wireless
stations to access your wired LAN.
stations to access your wired LAN.
Use the following buttons to navigate the Wizard:
Back
Click Back to return to the previous screen.
Next
Click Next to continue to the next screen.
No configuration changes will be saved to the G-560 until you click Finish.
3.3.1 Basic Settings
Click SETUP WIZARD to display the first wizard screen shown next. Refer to the System
Screens chapter for more background information.
Screens chapter for more background information.
1 Enter a descriptive name to identify the G-560 in the Ethernet network.
2 Select Obtain IP Address Automatically if you want to put the G-560 behind a router
that assigns an IP address. If you select this by mistake, use the RESET button to restore
the factory default IP address.
the factory default IP address.
3 Select Use fixed IP Address to give the G-560 a static IP address. The IP address you
configure here is used for management of the G-560 (accessing the web configurator).