ZyXEL Communications 100-NH User Manual

 Chapter 6 Wireless LAN

NWA1000 Series User’s Guide

This screen varies depending on the operating mode you select in the Wireless LAN > Wireless 
Settings screen.

Use this screen to employ WPA2 as the security mode for your NWA that is in root AP, MBSSID or 
repeater operating mode. Select  WPA2 or WPA2-MIX in the Security Mode field to display the 
following screen.

Security: WPA2-MIX for Access Point 

The following table describes the labels in this screen.

Key 1 to 

Key 4

The WEP keys are used to encrypt data. Both the NWA and the wireless stations must use 
the same WEP key for data transmission.

If you chose 64-bit WEP, then enter any 5 ASCII characters or 10 hexadecimal 
characters ("0-9", "A-F"). 

If you chose 128-bit WEP, then enter 13 ASCII characters or 26 hexadecimal characters 
("0-9", "A-F"). 

You can configure up to four keys, but only one key can be activated at any one time. 

Back

Click Back to return to the previous screen.

Apply

Click Apply to save your changes.

Cancel

Click Cancel to begin configuring this screen afresh.

Security: WEP (continued)

Security: WPA2-MIX for Access Point

Security Settings

Profile Name

This is the name that identifying this profile.

Security Mode

Choose  WPA2 or WPA2-MIX in this field.

Rekey Options