ZyXEL Communications 100-NH User Manual

 Chapter 6 Wireless LAN

NWA1000 Series User’s Guide

Use this screen to employ WPA2-PSK or WPA2-PSK-MIX as the security mode of your NWA. Select 
WPA2-PSK or WPA2-PSK-MIX in the Security Mode field to display the following screen.

Security: WPA2-PSK or WPA2-PSK-MIX

The following table describes the labels not previously discussed

Security Mode

Choose the same security mode used by the AP.

Rekey Option

Reauthentication 
Time

Specify how often wireless stations have to resend user names and passwords in order to 
stay connected. 

Enter a time interval between 0 and 3600 seconds. Enter “0” to turn reauthentication off. 

If wireless station authentication is done using a RADIUS server, the reauthentication timer 

on the RADIUS server has priority.

Enter how often the external authentication server 

requires a connected wireless client to reauthenticate itself to the server again.

Enable Group-key 
Update

Group Key Timer is the rate at which the RADIUS server sends a new group key out to all 
clients. Click the check box to enable the Group Key Update and type a number between 
100 and 3600 for the time rate.

Apply

Click Apply to save your changes.

Cancel

Click Cancel to begin configuring this screen afresh.

Security: WPA2 for Wireless Client (continued)

Security: WPA2-PSK or WPA2-PSK-MIX

Profile Name

This is the name that identifying this profile.

Security Mode

Choose WPA2-PSK or WPA2-PSK-MIX in this field.

Pre-Shared Key

Type a pre-shared key from 8 to 63 case-sensitive ASCII characters (including spaces 
and symbols).