ZyXEL Communications 202H Plus User Manual

Prestige 202H Plus Quick Start Guide 

4

 

2  Hardware Installation 

 

ON/OFF 

Turn the router on and off by pushing the power button (in is ON, out is OFF). 

POWER 12VAC 

Connect to a power source using the power adapter for your region (see your User’s Guide). 

LAN 1-4 

Connect to computer(s) / external hub(s) using an Ethernet cable. The LAN ports are auto-
crossover, which means either a crossover or straight-through Ethernet cable will do in either 
case. 

CONSOLE 

Connect the male end of the console cable to the console port of the router and the female end to 
a serial port (COM1, COM2 or other COM port) of your computer. 

ISDN 

Connect the router to the ISDN network using the included ISDN cable. Plug one end of the cable 
into the port labeled ISDN and the other to the ISDN wall jack. 

PHONE 1-2 

Connect your analog phone devices to these ports via R-J11 cables. 

Turn on the Prestige by pressing the ON/OFF button.  

The PWR/SYS LED blinks green while performing a system test and then stays on steady green if the testing is 
successful. If the router senses a low voltage power supply, the PWR/SYS LED turns on steady red. The LAN, and 
ISDN LEDs turn on if they are properly connected.