ZyXEL Communications 200 Series User Manual

Chapter 36 Addresses

ZyWALL USG 100/200 Series User’s Guide

Figure 450   Object > Address > Address

The following table describes the labels in this screen. See 

 for 

more information as well.  

The Address Add/Edit screen allows you to create a new address or edit an existing one. To 
access this screen, go to the Address screen (see 

the Add icon or an Edit icon.

Figure 451   Object > Address > Address > Edit

Table 200   Object > Address > Address

#

This field is a sequential value, and it is not associated with a specific address.

Name

This field displays the configured name of each address object.

Type

This field displays the type of each address object. “INTERFACE” means the object 
uses the settings of one of the ZyWALL’s interfaces.

Address

This field displays the IP addresses represented by each address object. If the 
object’s settings are based on one of the ZyWALL’s interfaces, the name of the 
interface displays first followed by the object’s current address settings.

Add icon

This column provides icons to add, edit, and remove addresses.
To add an address, click the Add icon at the top of the column. The Address Add/
Edit screen appears.
To edit an address, click the Edit icon next to the address. The Address Add/Edit 
screen appears.
To delete an address, click on the Remove icon next to the address. The web 
configurator confirms that you want to delete the address before doing so.