Technicolor - Thomson 210i User Manual
SpeedTouch 210i
32
♦
Dial-In Service – Enable
♦
Start IP Address – 192.168.2.200
Creating a LAN-to-LAN Dialer Profile
After enabling the Dial-in service, you must create a LAN-to-LAN profile
for each network. From the Advance Setup menu, click LAN-to-LAN
Dialer Profile to enter the setup page displayed below.
for each network. From the Advance Setup menu, click LAN-to-LAN
Dialer Profile to enter the setup page displayed below.
The router provides 16 LAN-to-LAN profiles for connecting to up to
16 different remote networks.
♦
Set to Factory Default – Clicking here will clear all the LAN-to-LAN
profiles.
profiles.
♦
Index – Click a number in the Index to open a detailed settings page for each
profile.
profile.
♦
Name – Indicate the name of the LAN-to-LAN profile. The symbol "???"
means the profile is available.
means the profile is available.
♦
Status – Indicate the status of the individual profiles. The symbol "v" means the
profile is active and "x" means it is inactive.
profile is active and "x" means it is inactive.
Click an index number to open an individual LAN-to-LAN profile settings page.