Technicolor - Thomson 210i Manuel D’Utilisation

♦ 

Dial-In Service – Enable 

♦ 

Start IP Address – 192.168.2.200 

After enabling the Dial-in service, you must create a LAN-to-LAN profile 
for each network. From the Advance Setup menu, click LAN-to-LAN 
Dialer Profile to enter the setup page displayed below. 
 

 
The router provides 16 LAN-to-LAN profiles for connecting to up to 
16 different remote networks. 
 

♦ 

Set to Factory Default – Clicking here will clear all the LAN-to-LAN 
profiles. 

♦ 

Index – Click a number in the Index to open a detailed settings page for each 
profile. 

♦ 

Name – Indicate the name of the LAN-to-LAN profile. The symbol "???" 
means the profile is available. 

♦ 

Status – Indicate the status of the individual profiles. The symbol "v" means the 
profile is active and "x" means it is inactive. 

 
Click an index number to open an individual LAN-to-LAN profile settings page.