Technicolor - Thomson 605 User Manual

Expert Configuration

E-DOC-CTC-20050429-0104 v1.0

5.3.1 IP Addresses

Overview

The IP address table shows all IP addresses configured on any of SpeedTouch™’s 
interfaces.
In the table following information is provided per IP address:

The Interface to which the IP address applies

The IP address/Netmask (in prefix notation)

The IP address Type, being either:

, in case the address has been automatically assigned by the 

SpeedTouch™ at startup or via negotiation

, in case of a manually configured IP address.

You can also assign additional new IP addresses to the SpeedTouch™ (see 

In case you select an IP address entry, you can:

Make changes to the IP address configuration (see 

and click Apply.

Click Delete to delete the IP address.

Add/change an IP

address

To add a new IP address to the SpeedTouch™:

Click New.

Select the Interface to which the IP address must apply.

Either:

Type a valid IP address/mask (in prefix notation).

Select Obtain an IP address automatically.

Click Apply to add the IP address.

To change the configuration of an existing IP address:

Select the IP address entry.

Make your changes.

Click Apply.