Technicolor - Thomson 605 User Manual

Expert Configuration

E-DOC-CTC-20050429-0104 v1.0

5.4.4 Routed PPPoI

Availability

The ISDN modem is only fully functional after activating the ISDN software module 
with the ISDN software module activation key. For more information, see 

Introduction

The Routed PPPoI configuration page allows you to add new Routed PPPoI 
connection entries or to change settings of existing entries.

Creating a Routed

PPPoI connection entry

To add a Routed PPPoI connection entry:

Click New.

In the Interface box, type a unique interface name.

In the ISP profile list, click:

The name of a profile if you want to use an existing profile.

 to create a new profile. Type the name you want to assign to this 

profile in the Enter Name box.

These ISP profile contain the ISDN parameters.

Type user name and password for the account at the ISP.

If needed, enter the ISDN parameters of your ISP.

Click Apply.

Additional configuration

Once created, per Routed PPPoI connection, additional configuration is possible by 
clicking:

Routing

Following fields are available:

:

Controls the networks that can be reached via this particular PPP connection. 
Specify the remote host or network in prefix notation. e.g. 172.16.0.0/16.

:

Allows you to assign a label to this connection.

These parameters can only be modified when the link is down. Take the link 
down first by clicking Hang-up.