Technicolor - Thomson 605 User Manual

Expert Configuration

E-DOC-CTC-20050429-0104 v1.0

Server Leases

In case the SpeedTouch™ DHCP server is running this table holds all leases which are 
assigned by the DHCP server to (accepted) DHCP clients.
Following lease parameters are shown :

:

The MAC address of the DHCP client. 

:

The IP address leased by the DHCP client. 

:

The DHCP server address pool the lease IP address is taken from. 

:

The DHCP server lease's Time To Live (in seconds).
For a permanent DHCP lease, TTL displays infinite. 

:

The DHCP server lease state: 

 (in case of statically added DHCP leases):

Indicating unused DHCP server leases. No DHCP request from this 
particular Client ID has been received by the DHCP server (yet). 

:

Indicating assigned DHCP leases. A DHCP lease has been assigned to this 
Client ID in the past (actually (Pool lease time)-TTL seconds ago). 

As soon as a DHCP request is received, the SpeedTouch™ DHCP server will assign 
the IP address matching the DHCP client's identity to this client (e.g. in case of a 
renewal, or for static entries). If no pre-configured lease could be found in the table, 
a new lease will be created when the client's request is granted. 

DHCP leases can be added manually, e.g. for DHCP client devices that need a 
"static" IP configuration. You can also remove existing DHCP leases.

Existing DHCP leases can be made static (i.e. TTL infinite) by selecting the 
DHCP lease and clicking Lock.