Technicolor - Thomson 605 User Manual

Expert Configuration

E-DOC-CTC-20050429-0104 v1.0

5.5.1 DHCP

Overview

The DHCP web page offers three tabs to configure the SpeedTouch™ 's DHCP 
functionality:

:

To configure the general behaviour of the SpeedTouch™ 's DHCP server. 

:

To configure the SpeedTouch™ DHCP relay. 

:

To configure the SpeedTouch™ DHCP client.

DHCP Server

The DHCP server configuration is split up in three sections:

To configure the SpeedTouch™ DHCP server ‘master’ settings and behaviour. 

To overview current the SpeedTouch™ DHCP server's current leases, and/or 
add/delete static DHCP lease entries. 

:

To overview and add/delete DHCP address pools for the SpeedTouch™ DHCP 
server. 

As mentioned before, the SpeedTouch™ DHCP server - configuring local network 
hosts - can be run in conjunction with one or more SpeedTouch™ DHCP clients or 
SpeedTouch™ DHCP Relay agents, each created on behalf of a wide area connection. 
I.e. for WAN interfaces the SpeedTouch™ offers DHCP client, or DHCP relay support 
to configure MAC Encapsulated Routing (MER) or Routed IPoA interfaces 
independently.

Server Config

Following fields are available:

:

Select this check box to enable the SpeedTouch™ DHCP server.

:

Select this check box to enable IP address conflict network probing before 
handing out an address to a client.

:

Select this check box if you want the SpeedTouch™ to take the IP address 
suggested by a DHCP client into account.