ZyXEL Communications X6004 User Manual

 Chapter 18 Outbound Line Group

X6004 User’s Guide

The screens for editing or adding SIP trunks on the X6004 contain the same fields. Only the 
screen used to add SIP trunks is shown below. Click the Add (or Edit) icon in the SIP Trunk 
section of the Outbound Line Group configuration screen to view the screen as shown. 

Figure 146   Add/Edit SIP Trunk 

Each field is described in the following table. 

Use this screen to configure a SIP trunk. Click the Advanced icon in the SIP Trunk section of 
the Outbound Line Group configuration screen to view the screen as shown.

Table 66   Add/Edit SIP Trunk

Machine ID

Select the ID of the X6004 on which you want to configure the SIP trunk. This is an 

internal name (not configurable) of the X6004. Only one choice is shown if you 

have not configured ZyStack.
This field is not available when editing a SIP trunk configuration.

Group Name

Type the name of this SIP trunk. You can use alpha-numeric characters and 

spaces are not allowed.

Description

Type the description for this SIP interface. You can use alpha-numeric characters 

and spaces are allowed.

Apply

Click this to save your changes.

Back to Outbound 

Group/Cancel

Click this to go to the Outbound Line Group screen without saving your changes.