Canon LV-7585 Instruction Manual

The eight different remote control codes (Code 1–Code 8) are assigned to this projector. Switching the 

remote control codes prevents interference from other remote control units when several projectors or video 

equipment next to each other are operated at the same time. Change the remote control code for the projector 

first before changing that for the remote control unit. See “Remote control” in the Setting Menu on page 51.

Press and hold the MENU and a number button (1–8) 

for more than 5 seconds to switch between the codes.

To initialize the remote control code, slide the RESET/ 

ON/ALL-OFF switch to “RESET,” and then to “ON.” The 

initial code is set to Code 1.

Press and hold the MENU and a number button 
(1–8) that corresponds to the remote control code 
for more than 5 seconds to switch between the 
codes.