Ricoh PJ WX3231N User Manual

53



[Wireless LAN settings]
<

Easy Connect (USB memory)>

This feature allows users to easily connect the projector to a computer over a network, 
without making 

Wireless LAN settings using Network Utility.

<

Mode>

Your projector is set to 

Ad hoc in the factory. Change the setting if you want to use the 

projector in 

Infrastructure mode.

<

SSID>

This is an ID code for connecting to specific individuals over a wireless LAN. This may 
also be called “

Network group” or “Network name”.  Please read the following carefully.

Note:  When you use Ad hoc communication mode, if there is a similar 

SSID network 

group (for example, RDPJ1, RDPJ, etc.) in the possible communication area, 
it is possible that your projector name will not be displayed in the 

Utility projector list column. If this is the case, set SSID to a completely different 
character string.

Set the following items if you have set the communication mode to Infrastructure.
If you have set the communication mode to Ad hoc for Network Projector setting, 
the following items should also be set.
<

DHCP>

If you set 

DHCP to Use, the IP address of the projector is assigned automatically by the 

DHCP server. If your network environment does not assign IP addresses automatically, 
set 

DHCP to Not use, then set the following items IP address, Subnet mask and 

Gateway manually.
<

IP address>

When 

DHCP is set to Not use, consult with your network administrator for the settings 

below and set the 

IP address manually.

An IP address is a unique number assigned to a terminal. The format is a string of four 
dot-separated three-digit numbers. (Example: 111.11.xxx.xxx)
Note:  If you set the same IP address for wireless LAN with the one for wired LAN, 

network function may fail to operate properly.

<

Subnet mask>

A subnet mask is used to determine what subnet the IP address assigned to a terminal 
belongs to. (Example: 55.55.xxx.xxx)
Note:  If you set the same subnet work for wireless LAN with the one for wired LAN, 

network function may fail to operate properly.

<

Gateway>

This value specifies the IP address of the device, such as a router, to be used to access 
servers outside the network. (Example: 111.11.xxx.xxx)

•