Ricoh PJ WX3231N User Manual

55

 [Wired LAN settings]
<

DHCP>

If you set 

DHCP to Use, the IP address of the projector is assigned automatically by the 

DHCP server. If your network environment does not assign IP addresses automatically, 
set 

DHCP to Not use, then set the following items IP address, Subnet mask and 

Gateway manually.
<

IP address>

When 

DHCP is set to Not use, consult with your network administrator for the settings 

below and set the 

IP address manually.

An IP address is a unique number assigned to a terminal. The format is a string of four 
dot-separated three-digit numbers. (Example: 111.11.xxx.xxx)
Note:  If you set the same IP address for wireless LAN with the one for wired LAN, 

network function may fail to operate properly.

<

Subnet mask>

A subnet mask is used to determine what subnet the IP address assigned to a terminal 
belongs to. (Example: 55.55.xxx.xxx)
Note:  If you set the same subnet work for wireless LAN with the one for wired LAN, 

network function may fail to operate properly.

<

Gateway>

This value specifies the IP address of the device, such as a router, to be used to access 
servers outside the network. (Example: 111.11.xxx.xxx)
 [Application]

<

WEB browser>

Browser authentication
Browser authentication and Password are factory-set to Off and no string, 
respectively. You should set them as soon as possible.
Password
If you have forgotten your password, set it again using the menu on the main unit.

•

•