Ricoh PJ WX3231N User Manual
57
Netw
ork/
USB memor
y
The control setting menu
This menu sets Projector name, Email function and PJLink function, etc. Select
Control
. The following content will be displayed.
Item
Description
Projector
name
name
Specify a desired character string (0 to 16 characters).
[
[
or
: Enter setting.] [
: Move left or right one character.] [
to
: Set a character.] [
: Confirm] [
: Select OK to end]
Press [
Cancel] to return.
Email
[
: E-mail setting] [
: Select item]
Status notification: On
Off
SMTP server: Enter a character string using numeric keys of the remote
control.
Port number: Enter a character string using numeric keys of the remote
control.
Destination address: Enter a character string using numeric keys of the
remote control.
control.
Port number: Enter a character string using numeric keys of the remote
control.
Destination address: Enter a character string using numeric keys of the
remote control.
Confirm: [OK
Cancel]
PJLink
[
: PJLink setting] [
: Select item]
PJLink authentication: On
Off
Password: Enter a character string (1 to 3 characters) using numeric keys of
the remote control.
Confirm: [OK
Cancel]
Wireless
network
network
[
or
: Enter setting.] [
: Select from Enabled, Disabled]
[
: Confirm] [
: Select OK to end]
Press [
Cancel] to return.
Detailed description
[Projector name]
This can be used to identify projectors when communicating with multiple projectors, or
if there is a possibility that another person who is out of communication range will be
using the same projector. It is recommended this is set to prevent incorrect transmission.
[Email]
<Status notification>: Sends alarm information to the specified E-mail address when
an error such as lamp failure occurs.
<SMTP server>: Set an IP address of the SMTP server.
<Port number>: Enter a port number of the SMTP server.
<Destination address>: Enter within 60 characters. (Example: xxx@xxx.xxx)
[PJLink]
<
This can be used to identify projectors when communicating with multiple projectors, or
if there is a possibility that another person who is out of communication range will be
using the same projector. It is recommended this is set to prevent incorrect transmission.
[Email]
<Status notification>: Sends alarm information to the specified E-mail address when
an error such as lamp failure occurs.
<SMTP server>: Set an IP address of the SMTP server.
<Port number>: Enter a port number of the SMTP server.
<Destination address>: Enter within 60 characters. (Example: xxx@xxx.xxx)
[PJLink]
<
PJLink authentication>: Set whether or not to authenticate the user by password
when the projector is accessed via the
PJLink-compliant Software Application. (Set [On]
or
[Off].)
<
Password>: Enter a password for confirmation when the above <PJLink
authentication> is set to [On].
•
•
•