Sanyo 1080HD User Manual

 ● THIS APPARATUS MUST BE EARTHED .

●

– This projector produces intense light from the projection 

lens. Avoid staring directly into the lens as much as possible, 
otherwise eye damage could result. Be especially careful 
that children do not stare directly into the beam.

– Install the projector in a proper position. Otherwise it may 

result in fire hazard.

– Allowing the proper amount of space on the top, sides, 

and rear of the projector cabinet is critical for proper air 
circulation and cooling of the unit. The dimensions shown 
here indicate the minimum space required. If the projector 
is to be built into a compartment or similarly enclosed, these 
minimum distances must be maintained. 

– To not cover the ventilation slot on the projector. Heat build-

up can reduce the service life of your projector, and can also 
be dangerous.

– If the projector is unused for an extended time, unplug the 

projector from the power outlet.

– Do not project the same image for a long time. The 

afterimage may remain on the LCD panels by the 
characteristic of panel.

1.5' (50 cm)

  3' (1 m)

1.5' (50 cm)

1.5' (50 cm)

SIDE and TOP

REAR

When hanging the projector from the 
ceiling, clean the air intake vents, air filters, 
and the top of the projector periodically 
with a vacuum cleaner. If you leave the 
projector unclean for a long time, the 
cooling fans can be clogged with dust, and 
it may cause a breakdown or a disaster.

Before installing and operating the projector, read this manual 
thoroughly.
The projector provides many convenient features and 
functions. Operating the projector properly enables you to 
manage those features and maintains it in good condition for 
many years to come.
Improper operation may result in not only shortening the 
product life, but also malfunctions, fire hazard, or other 
accidents.
If your projector seems to operate improperly, read this 
manual again, check operations and cable connections and try 
the solutions in the “Troubleshooting” section in the back of 
this manual. If the problem still persists, contact the dealer 
where you purchased the projector or the service center.

The symbol mark and recycling systems described below 

apply to EU countries and do not apply to countries in other 

areas of the world.

Your product is designed and manufactured with high quality 

materials and components which can be recycled and/or 

reused.

The symbol mark means that electrical and electronic 

equipment, batteries and accumulators, at their end-of-

life, should be disposed of separately from your household 

waste.
Note: 

If a chemical symbol is printed beneath the symbol mark, 

this chemical symbol means that the battery or accumulator 

contains a heavy metal at a certain concentration. This will be 

indicated as follows: Hg: mercury, Cd: cadmium, Pb: lead

In the European Union there are separate collection systems 

for used electrical and electronic equipment, 

batteries and accumulators.

Please, dispose of them correctly at your local 

community waste collection/recycling centre.
Please, help us to conserve the environment 

we live in! 

Not for use in a computer room as defined in the Standard 
for the Protection of Electronic Computer/Data Processing 
Equipment, ANSI/NFPA 75.
Ne peut être utilisé dans une salle d’ordinateurs telle que 
définie dans la norme ANSI/NFPA 75 Standard for Protection 
of Electronic Computer/Data Processing Equipment.