Sanyo 1080HD User Manual

When moving the projector, make sure that the automatic 
slide shutter is closed, retract the adjustable feet, and lock the 
lens with the Lens Shift Lock to prevent damage to the lens 
and cabinet.
When the projector is unused for an extended period, put it 
into a suitable case.
Care must be taken when handling the projector; do not drop, 
bump, subject it to strong forces, or put other things on the 
cabinet. 

20˚

20˚

Do not tilt the projector more than 20 
degrees from side to side.

Do not point the projector down to 
project an image. 

Do not put the projector on either side 
to project an image. 

Install the projector properly. Improper installation may reduce 
the lamp life and cause fire hazard.

Openings in the cabinet are provided for ventilation. To 
ensure reliable operation of the product and to protect it from 
overheating, these openings must not be blocked or covered. 

Air Intake Vent

Exhaust Vent
(Hot air exhaust)

 

Hot air is exhausted from the exhaust vent. When using or 
installing the projector, the following precautions should be 
taken. 

– Do not put any flammable objects or spray can near the 

projector. Hot air is exhausted from the ventilation holes.

– Keep the exhaust vent at least 3’ (1 m) away from any 

objects.

– Do not touch a peripheral part of the exhaust vent, 

especially screws and metallic part. This area will become 
hot while the projector is being used.

– Do not put anything on the projector. Objects put on the 

cabinet will not only get damaged but also cause fire 
hazard by heat.

Cooling fans are provided to cool down the projector. 
The fan’s running speed is changed according to the 
temperature inside the projector.

–  Do not drop or bump the projector, otherwise damages or 

malfunctions may result.

–  When carrying the projector, use a suitable carrying case.
–  Do not transport the projector by courier or any other 

transport service in an unsuitable transport case. This 
may cause damage to the projector. For information 
about transporting the projector by courier or any other 
transport service, consult your dealer.

–  Do not put the projector in a case before it is cooled 

enough.

Do not point the projector up to 
project an image. 

For ceiling mounting, you need the ceiling mount kit 
designed for this projector. When not mounted properly, 
the projector may fall, causing hazards or injury. For 
details, consult your dealer.  The warranty on this projector 
does not cover any damage caused by use of any non-
recommended ceiling mount kit or installation of the 
ceiling mount kit in an improper location.

–   Set the highland mode properly according to the altitude 

in which the projector is being used (p.38).  Failure to do 
so may affect the projector life.