Sony PX35 User Manual

Page of 165
13
 GB
Location and Function of Controls
Over
v
iew
a
INPUT A connectors 
Connect to a computer. 
• HD D-sub 15-pin, female:
Connect to the monitor output on a 
computer using the supplied cable.
• AUDIO (stereo mini-jack): Connects 
to the audio output on a computer.
b
ETHER (RJ-45)
Connects to the LAN cable when the 
network function is in use. 
Consult the dealer for connection and 
installation.
c
RS-232C connector (D-sub 9-
pin, female)
Connects to a computer to operate the 
projector from the computer.
d
CONTROL S IN/PLUG IN 
POWER (DC 5V output) jack
Connects to the control S out jacks of the 
Sony equipment. Connects to the 
CONTROL S OUT jack on the supplied 
Remote Commander when using it as a 
wired Remote Commander. In this case, 
when a stereo cable is used, you do not 
need to install the batteries in the 
Remote Commander, since the power is 
supplied from this jack.
e
USB connector (USB plug for 
upstream, 4-pin)
Connects to the USB connector on a 
computer. When you connect the 
projector to the computer, you can 
control the mouse function with the 
supplied Remote Commander.
f
Video input connectors
Connect to external video equipment 
such as a VCR.
• S VIDEO (mini DIN 4-pin): 
Connects to the S video output (Y/C 
video output) of video equipment.
• VIDEO (phono type): Connects to 
the composite video output of video 
equipment.  
• AUDIO input L (MONO)/R (phono 
type): Connect to the audio output of 
equipment. For stereo equipment, use 
both the L and R jacks; for monaural 
equipment, use the L (MONO) jack 
only.
g
INPUT B connectors 
Connect to a computer.
• HD D-sub 15-pin, female:
Connects to the monitor output on a 
computer using the supplied cable.  
• AUDIO (stereo mini-jack)/Shared 
by INPUT B and C: Connects to the 
audio output on a computer.
h
INPUT C connector (RGB (DVI)) 
(DVI-D)
Connects to a computer equipped with 
DVI (digital) output connector with a 
DVI cable.
i
OUTPUT connectors
MONITOR (HD D-sub 15-pin, 
female): 
Connect to the video input connector on 
the monitor. Outputs signals from the 
selected channel and computer signals 
only from among the signals from the 
INPUT A, INPUT B, or INPUT D RGB 
connector. This connector does not 
output any signals from the INPUT C 
connector.
• AUDIO (stereo mini-jack): Connects 
to external active speakers. The 
volume of the speakers can be 
controlled by the VOLUME +/– keys 
on the Remote Commander or the 
VOLUME +/– keys on the control 
panel.
Connector Panel
VOLUME
~AC IN
INPUT D
OUTPUT
INPUT A
INPUT B
INPUT C
ETHER
(PLUS IN POWER)
(MONO)
L
R
RS-232C
IN
S VIDEO
VIDEO
AUDIO
RGB
AUDIO
RGB
DVI-D
R/R-Y/Pn
G/Y
B/B-Y/Ps SYNC/HD
VD
AUDIO
MONITOR
AUDIO
AUDIO
ENTER
MENU
RESET
APA
CONTROL
REMOTE
VIDEO IN
CONTROL S