Sony PX35 User Manual

GB 

26

Projecting

When you connect an IBM PC/AT compatible to the projector by using the 
USB cable, you can control the mouse of the computer using the Remote 
Commander.
The R/L CLICK keys and joystick function as follows.

Make sure that nothing obstructs the infrared beam between the Remote Commander 
and the remote control detector on the projector. 

You can adjust picture quality when projecting a signal from the computer. 

Project a still picture from the computer.

Press the APA key. 
“Complete!” appears on the screen when the picture is adjusted properly

.

• Press the APA key when the full image is displayed on the screen. If the projected 

image includes a large black area around the periphery, the APA function will not 
function properly and in some cases, portions of the image may not be displayed.

• When you switch the input signal or re-connect a computer, press the APA key again 

to adjust the picture again.

• You can cancel the adjustment by pressing the APA key again while “ADJUSTING” 

appears on the screen.

• The picture may not be adjusted properly depending on the kinds of input signals.
• Adjust the items in the INPUT SETTING menu when you adjust the picture manually.

Press the MENU key and then, in the INSTALL SETTING menu, turn on 
the security lock setting.

Enter the password.
Use the MENU, 

M

m

<

,

, and ENTER keys to enter the four-digit 

password. (The default setting is 

“

ENTER, ENTER, ENTER, ENTER.

”

) 

R CLICK (front)

Right button

L CLICK (rear)

Left button

Joystick

Corresponds with the movements of the mouse