Sony PX35 User Manual

27

 GB

Projecting

Set

ting
 Up and Pro

jec
ti

ng

Next, the screen for entering the new password is displayed. (Enter the 
password at this screen even if you want to keep the current password.)

Enter the password again to confirm.
If the password is entered incorrectly, the menu screen displays an 

“

Invalid 

Password

”

 message.

The security lock is completed.

Turn the main power off and disconnect the AC power cord.

 

The security lock is set to on, then it becomes effective. The screen for entering 
the password is displayed when the power is turned on the next time. 

• You will not be able to use the projector if you forget your password and the password 

administrator is not available. Be please aware that using the security lock can prevent 
valid usage in such cases. It is recommended that you make a note of the selected 
password.

• Once the security lock is set and the main power is turned off, the screen for entering 

the password is displayed when the power is turned on the next time. Enter the 
password that was set. If you fail to enter the correct password after three tries, the 
projector cannot be used. In this case, press the 

I

 / 1 key to turn off the power.

• The security lock will not be set if the correct password is not entered in steps 2 and 

3, or a key other than the MENU, arrow keys, and ENTER key is pressed.

• If you call the customer service center because you have forgotten the password, you 

will need to be able to verify the projector’s serial number and your identity.  (This 
process may differ in other countries.)  Once your identity has been confirmed, we 
will provide you with the password.