Sony PX35 User Manual
37
GB
The INFORMATION Menu
Adj
u
st
ment
s and
Set
tings Usin
tings Usin
g the
Men
u
Lamp Mode
Sets the lamp brightness in the projection.
High:Illuminates the projected image
brightly.
Standard:Reduces fan noise and power
consumption. The brightness of the
projected image will be lower compared
with the “High” setting.
projected image will be lower compared
with the “High” setting.
Direct Power On/Off function
If you will be using a circuit breaker to turn the
power for the entire system on and off, set the
direct power on function to “On”. When you
turn off the power, you can also just unplug the
power cord without pressing the
power for the entire system on and off, set the
direct power on function to “On”. When you
turn off the power, you can also just unplug the
power cord without pressing the
I
/ 1 key.
High Altitude Mode
Off:
Use this setting when using the projector
at normal altitudes.
at normal altitudes.
On:
Use this setting when using the projector
at an altitude of 1,500 m or higher.
at an altitude of 1,500 m or higher.
Security Lock
Turns on the projector’s security lock
function.
function.
Off: Turns off the security lock function.
On: Turns on the security lock function,
which locks the projector once a
password has been set.
password has been set.
For details, see “Using the security
lock” on page 26.
lock” on page 26.
The INFORMATION
Menu
Menu
The INFORMATION menu displays the
horizontal and vertical frequencies of the
input signal and the used time of the lamp.
horizontal and vertical frequencies of the
input signal and the used time of the lamp.
fH
Displays the horizontal frequency of the
input signal.
The displayed value is approximate.
input signal.
The displayed value is approximate.
fV
Displays the vertical frequency of the input
signal.
The displayed value is approximate.
signal.
The displayed value is approximate.
Lamp Timer
Indicates how long the lamp has been turned
on.
on.
IP Adress
Displays the IP address that is set for the
projector.
projector.
Subnet Mask
Displays the subnet mask that is set for the
projector.
projector.
These only display on the screen. You cannot
alter the display.
For details on the network functions, including
setting the IP address and the subnet mask,
contact your dealer or Sony customer service.
alter the display.
For details on the network functions, including
setting the IP address and the subnet mask,
contact your dealer or Sony customer service.
Menu Items
Note
I n p u t A
f H : 4 8 . 4 7
k H z
f V: 6 0 . 0 0
H z
N o . 2 3
1 0 2 4 x 7 6 8
1 0 2 4 x 7 6 8
L a m p T i m e r :
4 H
I N F O R M AT I O N
IP Address:
1 9 2 . 1 6 8 . 0 . 1
S u b n e t M a s k :
2 5 5 . 2 5 5 . 0 . 0
Memory
number of
a input
signal
number of
a input
signal
Signal
type
type