Sony PX35 User Manual

GB 

38

Maintenance

B

When the lamp has burnt out or dims, or 
“Please replace the LAMP.” appears on the 
screen, replace the lamp with a new one. Use 
LMP-P260 Projector Lamp as the 
replacement lamp. The lamp life varies 
depending on conditions of use.

Turn off the projector, then unplug the 
power cord.
Wait for at least an hour for the lamp to cool.

The lamp becomes a high temperature after 
turning off the projector with the 

I

 / 1 key. If 

• If the lamp breaks, consult with qualified 

Sony personnel.

• Pull out the lamp by holding the handle. If 

you touch the lamp, you may be burned or 
injured.

• When removing the lamp, make sure it 

remains horizontal, then pull straight up. Do 
not tilt the lamp. If you pull out the lamp 
while tilted and if the lamp is broken, the 
pieces may scatter, causing injury.

Place a protective sheet (cloth) 
beneath the projector. Turn the 
projector over so you can see its 
underside.

Be sure that the projector is stable after 
turning it over.

Open the lamp cover by loosening a 
screw with the Phillips screwdriver.

For safety sake, do not loosen any other 
screws.

Loosen the three screws on the lamp 
unit with the Phillips screwdriver. Pull 
out the lamp unit by the handle.  

• The screws have washers.  Do not 

remove the screws, just loosen them.

Handle