Epson EB-96W User Manual
Other Problems
No sound can be heard or the sound is faint
Check
Remedy
Check that the audio/video cable is securely attached to both the
projector and audio source.
projector and audio source.
Disconnect the cable from the Audio port, and then reconnect the cable.
Is the volume adjusted to the minimum setting?
Adjust the volume so that sound can be heard.
s
s
Is the Mic Input Level set at the maximum?
Lower the Mic Input Level.
s
Settings - Mic Input Level
Is A/V Mute active?
Press the [A/V Mute] button on the remote control to cancel A/V Mute.
s
Is the audio cable's specification "No resistance"?
When using a commercially available audio cable, make sure it is labeled "No resistance".
Is it connected with an HDMI cable?
If no audio is output when connecting via an HDMI cable, set the connected equipment to PCM output.
Is Output audio from the projector selected?
(Only when projecting USB Display)
(Only when projecting USB Display)
Click All Programs - EPSON Projector - Epson USB Display - Epson USB Display Vx.xx Settings, and then select
Output audio from the projector
Output audio from the projector
.
No sound can be heard from the microphone
Check
Remedy
Is the microphone connected correctly?
Disconnect the cable from the Mic port, and then reconnect the cable.
s
Is the Mic Input Volume turned down too low?
Adjust the Mic Input Volume so that sound can be heard.
s
Settings - Mic Input Level
Is Plug-in Power set correctly?
When using a condenser microphone, set Plug-in Power to On.
s
Extended - Plug-in Power
Problem Solving
105