Epson EB-96W User Manual

Check

Remedy

Is the remote control light-emitting area pointing towards the
remote receiver on the projector during operation?

Point the remote control towards the remote receiver.

s

Is the remote control too far from the projector?

The operating range for the remote control is about 6 m.

s

Is direct sunlight or strong light from fluorescent lamps shining onto
the remote receiver?

Set the projector up in a location where strong light does not shine onto the remote receiver. Or set the remote receiver to
Off

 from Remote Receiver in the Configuration menu.

s

 Settings - Remote Receiver 

Is the correct setting for the Remote Receiver selected?

Check the Remote Receiver from the Configuration menu.

s

 Settings - Remote Receiver 

Are the batteries dead or have the batteries been inserted correctly? Make sure the batteries are inserted correctly or replace the batteries with new ones if necessary.

s

Check

Remedy

Change  the  Language  setting.

Adjust  the  Language  setting  from  the  Configuration  menu.

s

  Extended   -   Language  

Check

Remedy

Is Standby Mode set to Communication On?

To use the Mail Notification function when the projector is in standby, set Communication On in Standby Mode from
the Configuration menu.

s

 Extended - Standby Mode 

Did a fatal abnormality occur and the projector come to a sudden
stop?

When the projector comes to a sudden stop, email cannot be sent.
If the abnormal state continues, contact your local dealer or the nearest address provided in the Epson Projector Contact
List.

s