Epson 7850p User Manual

To change the remote control’s ID to match that of a projector, follow 
these steps:

1. Press the 

ID

 button on the remote control. You see it light. 

2. Press one of the numbered buttons on the remote control to select 

the ID of the projector you want to operate. 

The 

ID

 button’s light shuts off and the new ID is registered.

3. Repeat steps 1 and 2 each time you want to switch projectors.

To check the remote control’s current ID, do the following:

1. Press the 

ID

 button twice in succession. After a moment, the 

button flashes. 

2. Count the number of flashes; this number corresponds to the 

remote control’s ID. (If it doesn’t flash, the ID is set to zero.)

Zero