Epson 7850p User Manual

You can use the menu system to change the video signal input at 
certain ports, turn sleep mode on or off, adjust the network settings, 
change the language, and customize several other features.

Use these settings to change how the projector processes incoming 
video signals. Several of these settings should normally be left at the 
factory default setting (except for the 

Computer

 and 

BNC Input

 

settings). 

■

Computer Input

 (in the Setting menu)

Select the setting for the type of equipment you’ve connected to 
the 

Computer

 port:

Analog-RGB

: For a computer connection

RGB-Video

: For a video player that outputs an RGB video signal 

■

BNC Input 

(in the Setting menu)

Select the setting for the type of equipment you’ve connected to 
the BNC ports: 

Analog-RGB

: For a computer connection

RGB-Video

: For a video player that outputs an RGB video signal

YCbCr

: For a video player that outputs an NTSC component 

video signal

YPbPr

: For a video player that outputs an HDTV component 

video signal

■

Video Signal 

(in the Video menu)

Leave this setting at 

Auto

 unless you are using a 60-hertz PAL 

system (select 

PAL60

). You can change this setting only if you’re 

displaying an image through the 

Video

 or 

S-Video

 port.