Epson 7850p User Manual

Make sure your projector and other equipment are set up as described 
in Chapter 3. Then follow the instructions below to start the projector 
and display an image. 

If you turn on any connected computer or video equipment before 
starting the projector, this lets the projector automatically detect and 
display the image source. If you turn on the projector first, or have 
multiple pieces of connected equipment, you may have to select the 
image source manually (see page 20).

Follow these steps to turn on the projector:

1. Remove the lens cap. 

2. Plug one end of the power cable into the projector, and the other 

end into a grounded electrical outlet.

3. Wait until the Ppower light stops flashing and turns orange. 

To shut down the projector, 
see page 29. Shutting down 
the projector correctly 
prevents premature lamp 
failure and possible damage 
from overheating. 

Power light