Epson 7850p User Manual

Selecting the image source lets you switch between images input from 
different pieces of equipment connected to the projector (such as a 
computer or DVD player). 

If you don’t see the image you want, select it using the 

Source

 

buttons either on the projector or the remote control. 

The 

Source

 buttons work as follows:

■

The projector has two 

Source

 buttons. Use the 

Computer/DVI

 

button to switch between 

EasyMP

, and between equipment 

connected to the 

Computer

 and 

DVI

 ports. 

Use the 

Video/BNC

 button to switch between equipment 

connected to the 

Video

, 

S-Video

, and 

BNC

 ports. 

■

The remote control has six 

Source

 buttons. Use them to switch 

between equipment connected to the port identified on each 
button, or select EasyMP to project wirelessly or from a memory 
card.

Note that the 

Computer

 and 

BNC

 ports can be set up to use different 

input signals (for example, Analog RGB or RGB Video)—so if you 
have equipment connected to one of these ports, it’s important to 
make sure the correct signal is selected to match the equipment you’re 
using. You can change the input signal settings using the projector’s 
menu system; see page 137. 

To focus and adjust the 
image, see page 24. If a 
projected image fails to 
appear, see page 21 for help.