Epson EMP-1825 User Manual
Adjusting Color for Several Projectors (Multi-Screen Color Adjustment)
35
Image Correction Method
After setting up the projectors, adjust the brightness and tone for each
image.
image.
A
B
Select the level to be adjusted in "Adjustment
Level".
Level".
• Each time a level is selected, the pattern of the level selected is
displayed.
• You can start adjusting from any level, usually you can make it
darker or lighter by adjusting 1 to 5 or 5 to 1.
C
Adjust the brightness with "Brightness Correct.".
• When you select level 5, it adjusts to the darkest image from
several projectors.
• When you select level 1, it adjusts to the brightest image from
several projectors.
• When you select level 2 to 4, it adjusts to the mid-range
brightness image from several projectors.
• Each time the [Enter] button is pressed the image displayed
changes between the pattern display and the actual image, and
you can check the adjustment results and make corrections in the
actual image.
you can check the adjustment results and make corrections in the
actual image.
D
Adjusting "Color Correct. (G/R)" and "Color Correct.
(B/Y)".
(B/Y)".
Each time the [Enter] button is pressed the image displayed
changes between the pattern display and the actual image, and you
can check the adjustment results and make corrections in the actual
image.
changes between the pattern display and the actual image, and you
can check the adjustment results and make corrections in the actual
image.
E
Repeat procedures 2 to 4 until adjustments are
finished.
finished.
F
When all adjustments are finished, press the [Menu]
button to close the configuration menu.
button to close the configuration menu.
Procedure