Epson EMP-TW10H User Manual
Projector Care-
21
Appendices
Replacing consumables
f Replacing the air filter
(Air filter: ELPAF04)
Replacing the air filter can also be performed when the projector is mounted to a ceiling.
Replacing the air filter can also be performed when the projector is mounted to a ceiling.
1
Turn off the projector power, wait for
the cool-down period to end, then
disconnect the power cable.
Cool-downg takes about 20 seconds.
2
Put your finger into the latch and lift
off the cover. Lift up the air filter to
remove it.
3
Replace the air filter with a new one.
Take out the old air filter and install the new
one. Please ensure there are no gaps
between the air filter and the plastic grill.
one. Please ensure there are no gaps
between the air filter and the plastic grill.
4
Replace the air filter cover.
First insert the tabs, and then press down on
the opposite side until it clicks into place.
the opposite side until it clicks into place.
f Changing the battery
(Replacement battery: 1 × CR2025 lithium battery)
1
Remove the battery holder.
While pressing the catch of the battery holder
inwards, pull the battery holder out.
inwards, pull the battery holder out.
2
Remove the old battery and insert the
new one.
Check the position of the (+) mark inside the
battery holder to ensure that the battery is
inserted the correct way.
battery holder to ensure that the battery is
inserted the correct way.
3
Replace the battery holder.
Press the battery holder in until it clicks.
p
Dispose of used air filters properly in accordance with
your local regulations.
your local regulations.
c
Keep batteries away from children to avoid the risk of accidents.
If a child swallows the battery, contact your doctor immediately.
If a child swallows the battery, contact your doctor immediately.
p
Please dispose of used batteries in accordance with
local waste disposal regulations.
local waste disposal regulations.