Epson EH-TW2900 User Manual

After using a subset of "Signal" and "Image" in the configuration menu to adjust the projected images, 
the adjusted values can then be saved (Save Memory).
In addition, the saved data can be retrieved easily, so that you can enjoy viewing images with the 
adjusted settings at any time (Load Memory).

Adjust each of the settings to the values 

to be saved. 

Press              , and select "Save 
Memory".
The Save Memory screen is displayed.

Select the memory name to register the 
adjustments to from Memory1 to 10, and 
press       or       . 

When     preceding the memory name is 
green, this indicates that adjustments are 
already saved to memory. 
Select an already saved memory name, and 
press        or        . 
A confirmation message will be displayed.
If you select "Yes", the previous memory 
content is erased, and the current adjustment 
values are saved.

Load saved memories.

Press              , and select "Load 
Memory".
The Load Memory screen will be displayed.

Select the target memory name.

Displayed for input sources other than computer

The adjustments that can be saved to memory are 
as follows.
Up to ten adjustments can be saved to memory.
"Rename Memory" is only available for EH-
TW4500/TW4400.

Signal

Setup Level

Block NR *

1

Mosquito NR *

1

HDMI Video Range

Overscan

EPSON Super White

Noise Reduction

4-4 Pull-down *

1

 

2-2 Pull-down *

2

 

Advanced

Frame Interpolation *

1

Progressive

*1 EH-TW4500/TW4400 only 
*2 EH-TW3500/TW2900 only