Epson EH-TW2900 User Manual

Viewing Images at a Preset Image Quality (Memory Function)

TIP

The color mode selected when 
the memory was registered is 
displayed on the right side.

The aspect    setting retrieved 
from memory may not be 
applied to the images if they 
are 16:9 images or if the input 
signal images have a particular 
resolution.

This feature can be used to erase and clean up 
unwanted memories.

Press              , and select "Erase 
Memory".
The Erase Memory screen will be displayed.

Select the memory name to erase.
A confirmation message will be displayed. If 
you select "Yes", the memory will be erased.

To erase all saved memories, select "Reset" - 
"Reset Memory" in the Configuration menu. 
     p.40

Select the memory name to be changed, 
and then press       or       .

The name selection screen is 
displayed.

To select a memory name from the displayed 
preset names, select the desired name and 
then press        or        and go to step 5. If you 
would like to use a custom name, select 
"Customized".

When you select "Customized", the 
following keyboard is displayed.
Use                           or         to select the 
desired key, and then press        or       . Once 
you have entered the name, select "Finish" 
and then press        or       .

The selected or entered memory name is 
displayed beside the preset memory 
number to indicate that the name has 
been changed.
After this, the changed name is displayed in 
the "Load Memory" and "Save Memory" 
screens.

The default names ("Memory1" to "Memory10") 
can be changed. You can rename memories so 
that its settings are easy to recognize.

Press              , and then select "Rename 
Memory". 
The "Rename Memory" screen is displayed.