Manualsbrain.com
  1. Manuals
  2. Brands
  3. JVC
  4. DLA-G150HTE
  5. User Manual

JVC DLA-G150HTE User Manual

Download
Page of 40
DLA-G150HTE
1-19
No.51847
33
Basic Operations
ENGLISH
DEUTSH
FRAN
ÇAIS
ITALIANO
ESPAÑOL
■ Projector’s buttons
■ Remote control unit
3. Adjust the Screen Size (Zooming)
Adjust the screen size with the remote control's ZOOM (T/W) 
buttons.
To enlarge the screen size:
Press the ZOOM (W) button.
To reduce the screen size:
Press the ZOOM (T) button.
4. Adjust Focus
Adjust focus with the following buttons on the remote control 
unit.
To focus on farther points:
Press the FOCUS + button.
To focus on nearer points:
Press the FOCUS – button.
5. Setting the Screen Aspect Ratio
Set in accordance with the screen aspect ratio that will be 
used. When a screen aspect ratio of 16:9 is used, a 4:3 
image can be projected within the screen without using the 
zoom function.
When using a 16:9 screen:
Press the “W” button.
When using a 4:3 screen:
Press the “S” button.
* There is no button on the unit.
* This setting can also be performed from the menu. (Refer 
to page 45.)
• When using a screen with a 16:9 aspect ratio
When set to “S” (4:3)
* If a 4:3 image is projected, some 
parts of the top and bottom of the 
image may not be displayed.
When set to “W” (16:9)
* A 4:3 image will be displayed in full 
in the middle of the screen.
LAMP
TEMP
STAND BY
HIDE
PC
VIDEO
MENU
KEYSTONE
PRESET
EXIT
ENTER
OPERATE
PRESET button
EXIT button
QUICK
ALIGN.
PC1
PC2
Y/C
VIDEO
HIDE
PRESET
ENTER
EXIT
MENU
FREEZE
SCREEN
OPERATE
DIGITAL
ZOOM
ZOOM
FOCUS
W
W
S
T
W
T
RM-M150 REMOTE CONTROL UNIT
SCREEN
KEYSTONE
W
S
PRESET button
EXIT button
SCREEN W/S button
DIGITAL
ZOOM
W
T
Remote control unit
FOCUS
Remote control unit
Remote control unit
SCREEN
W
S
SCREEN
W
S
34
Basic Operations 
■ Projector’s buttons
■ Remote control unit
Turning off Image (HIDE)
Video image can be temporarily turned off. 
Press the HIDE button once:
Video image instantly turn off.
Press the HIDE button again:
Video image come on again.
Note
• When the projected image input is changed, the HIDE 
function is canceled and the image return.
Removing the Trapezoidal Distortion of 
the Image
If the image projected on the screen is distorted in trapezoid 
form, correct it with the KEYSTONE buttons on the projector. 
When the KEYSTONE button is pressed, “Keystone” 
appears on the screen together with the level bar and set 
value (–80 to 128). When “15 sec.” is displayed in the menu, 
“Keystone” will appear in approximately 15 seconds.
When you press the KEYSTONE
button:
The trapezoid form is corrected as shown in the figure.
When you press the KEYSTONE
button:
The top bottom inverted trapezoid form is corrected as 
shown in the figure.
* To cancel correction and restore the original screen, press 
the PRESET button. 
(Adjusted value:0)
* Press the EXIT button to immediately remove the keystone 
display.
Notes
• The trapezoidal distortion (keystone) can be adjusted from 
the option menu. (Refer to page 53.) 
• The range of the trapezoidal distortion adjustment is 
approximately 20° in the vertical direction. 
• Interference patterns may appear on the screen when 
adjusting the keystone. This is not a malfunction. 
• Depending on the type of signal, some noise may appear in 
the picture when the keystone is adjusted.
This is not a malfunction.
LAMP
TEMP
STAND BY
HIDE
PC
VIDEO
MENU
KEYSTONE
PRESET
EXIT
ENTER
OPERATE
KEYSTONE
/
buttons
PRESET
button
EXIT
button
HIDE
button
QUICK
ALIGN.
PC1
PC2
Y/C
VIDEO
HIDE
PRESET
ENTER
EXIT
MENU
FREEZE
SCREEN
OPERATE
DIGITAL
ZOOM
ZOOM
FOCUS
W
W
S
T
W
T
RM-M150 REMOTE CONTROL UNIT
SCREEN
KEYSTONE
W
S
KEYSTONE
/
buttons
PRESET button
EXIT button
HIDE button
HIDE
HIDE
Remote control unit
Projector
Keystone
123
KEYSTONE
KEYSTONE
KEYSTONE
KEYSTONE
Projected image with trapezoidal distortion
Remote control unit
Projector