Infocus 210 User Manual

•

Do not look directly into the projection lens when the projector 
is turned on. The bright light may harm your eyes.

•

The top and bottom of the projector can be very hot to the 
touch after use. Use extreme care or let it cool before lifting it.

•

Do not block the grills at the front or top of the projector. 
Restricting the air flow can cause it to overheat and turn off.

•

Handle the projector as you would any product with glass 
components. Be especially careful not to drop it.

•

Avoid leaving the projector in direct sunlight or extreme cold 
for extended periods of time. If this happens, allow it to reach 
room temperature before use.

•

Transport the projector in a vendor-approved hard or soft case. 
Part numbers for these cases are listed on page 57. Call your In 
Focus dealer to order.

The first place to look for help is in this manual. Be sure to check 
the guidelines in “Troubleshooting” on page 49. 

If this manual doesn’t answer your question, call your In Focus 
dealer. You can also call In Focus Customer Service directly at

. Call between 6 a.m. and 5 p.m. PST, Monday 

through Friday. In Europe, call In Focus in The Netherlands at 

. In Singapore, call 

. Or, send us an 

e-mail at 

.

The In Focus World Wide Web address is http://www.infs.com

.

These products are backed by a limited one-year warranty. The 
details of the warranty are printed at the back of this manual. 
Longer term warranties can be purchased from your In Focus 
dealer. Refer to page 58 for part numbers.