Pitney Bowes B702 User Manual

To change the supervisor password:

1.  The meter prompts “Super Pswd Change?"

2.  Press Yes.

3.  The meter prompts "Enter Super Password.”

4.  Key in the new password. You may use numbers only 

and cannot enter more than four.

5.  Press Enter.

6.  The meter prompts “Changed” and advances to the next 

menu item.

Password protection is a feature that offers an additional 
measure of security by limiting access to certain meter op-
erations to authorized personnel only. 

IMPORTANT! Password protection is available only when the 
meter’s accounting feature is activated and in use. 

To use this feature:

1.  The meter prompts “Password Enable?"

2.  Press Yes.

3.  The meter prompts "To Enable Press YES.”

4.  Press Yes.

5.  The meter prompts “Enter Super  Password.”

6.  Key in the supervisor's password. You may use numbers 

only and you may not enter more than four. If the meter 
can’t accept the password, it prompts “Error” and returns 
to the “Password Enable?” prompt.

7.  Press Enter.

8.  The meter prompts “Enabled” and goes to the next menu 

item.

NOTE:  With password protection enabled, you must enter the 
supervisor password to get into the meter's setup mode.