Toshiba TRST-A10 SERIES User Manual

3. APPEARANCE

3. 3 Connectors

3-3

SPAA-207-R1

3.3 Connectors

CAUTION!
1.The drawer interface connector is exclusively for connecting the drawer. Do not connect a

phone line or any other cables than the drawer cable to this connector. Doing so may cause a
failure of the phone line and this printer.

2.To the DC24V connector (socket connector), do not connect anything other than the built-in AC

adapter.

3.The built-in AC adapter is exclusively for this printer. Do not use it for any other machines.

[DC24V] (Socket connector)

The built-in AC adapter supplies +24V power to the printer through this connector. Do not connect
anything other than the TOSHIBA TEC Specified AC adapter.

[Serial interface connector]

An interface cable which connects the printer to a POS terminal or Personal Computer is
connected to this connector. A RS-232C interface cable (Serial I/F model) is needed for this
connector.

[USB interface connector]

An interface cable which connects the printer to a POS terminal or Personal Computer is
connected to this connector. A USB I/F (V2.0 Full Speed) is needed for this connector.

4 [Drawer interface Connector] [CDKO] (6 pin modular connector)

A drawer cable which connects the printer to a drawer is connected to this connector. To this
connector, a TOSHIBA drawer can be connected. Do not connect anything other than the
connectable drawer.

NOTE: For connectable drawers, refer to your nearest authorized TOSHIBA TEC representative.