Toshiba TRST-A10 SERIES User Manual
3. APPEARANCE
3. 2 LED and Feed Button
3-2
SPAA-207-R1
Error Status Table
Green LED Blinking (Slow)
Problem
What to Do
Where to Go
Receipt paper is low
There are about 4 ½ meters,
± 3 meters,
(15 feet,
± 10 feet) of paper left. Change
the paper soon to avoid running out of
paper part way through a transaction.
paper part way through a transaction.
See “Loading the
Receipt Roll” in
chapter 5.3.
Receipt Roll” in
chapter 5.3.
Green LED Blinking (Fast)
Problem
What to Do
Where to Go
Receipt paper is out
Change the paper now. Do not run a
transaction without paper as the data
may be lost.
transaction without paper as the data
may be lost.
See “Loading the
Receipt Roll” in
chapter 5.3.
Receipt Roll” in
chapter 5.3.
Receipt cover is open
Close the cover. The printer will not
operate with the cover open.
operate with the cover open.
Knife failure
Open the receipt cover and check the
knife. Clear any jammed paper you can
see. Tear off any excess paper against
the tear-off blade.
knife. Clear any jammed paper you can
see. Tear off any excess paper against
the tear-off blade.
NOTE: If other LED status except for the above occurs, turn the power off, and then on. If this
does not restore the LED, contact your nearest TOSHIBA TEC representative for
assistance
assistance
.