Toshiba TRST-A10 SERIES User Manual

Page of 31
2. SPECIFICATIONS 
2.2 Receipt Roll  
 
2-2 
SPAA-207-R1
 
2.2 Receipt Roll
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Paper type 
Thermal paper rolled with the print side facing outside 
Width (W1)  
80 +/ -1.0 mm 
Width (W2)  
58 +0/ -1.0 mm (With optional 58 mm paper guide) 
Outer diameter (D)  
76 +/-2.0 mm 
Paper thickness (T) 
0.065 +/- 0.005 mm 
Weight 53 
g/m
2
 
Outer core diameter  
21.5 mm 
Inner core diameter  
12.5 +/- 0.5 mm 
Recommended thermal 
paper  
Only paper rolled onto a core is acceptable, however, the paper 
end should not be pasted to the core. TOSHIBA TEC 
recommends using the following thermal paper for this product 
Manufacturer : OJI  
Type   
: JFD210  
 
CAUTION! 
Use only paper which meets specified requirements. Use of non-specified paper may shorten 
the head life of the printer, resulting in problems with print quality, cause a paper feed failure or 
shorten the cutter life. All paper should be handled with care to avoid any damage to the paper. 
Read the following guideline carefully. 
 
 
•    Do not store the paper for longer than the manufacturer’s recommended shelf life. 
•    Store the paper in a cool, dry place. Avoid areas where they would be exposed to direct   
      sunlight, high temperature, high humidity, dust or gas. 
•    A contact of chemical or oil may discolor or erase the printed record. 
•  Rubbing the paper hard with nail or hard object may discolor the paper. 
•    The paper end should not be pasted to the core. 
 
For further information please contact your authorized TOSHIBA TEC representative or authorized 
paper manufacturer.
 W1 or W2