Xerox CX User Manual
Creating a calibration table using the Inline
Spectrophotometer
Spectrophotometer
Requirements:
The media that you choose must be loaded as SEF, and the
printer must be ready for printing.
printer must be ready for printing.
1. Suspend the Process Queue.
2. Make sure that the Print Queue is released and that no jobs
2. Make sure that the Print Queue is released and that no jobs
are running.
3. From the Tools menu, select Calibration.
4. Define the parameters as follows:
a. In the Paper Coating list, select either Coated or
Uncoated for the paper type.
Note: You can only select the media that is loaded in the printer.
b. In the Weight list, select the weight of the paper stock.
c. In the Tray list, select the tray where the paper stock is
c. In the Tray list, select the tray where the paper stock is
loaded for the calibration.
Creating a calibration table using the Inline Spectrophotometer
17