Xerox CX User Manual
d. In the Screening area, select the screening method for
which you want to create a calibration table.
Note: You can select all screening methods. The server creates a
calibration table for each screening method that you select.
calibration table for each screening method that you select.
e. The Save as box displays an automatic name for the
calibration tables according to the media name. If required,
you can type a different name. The screening number is
appended to the resulting calibration file name.
you can type a different name. The screening number is
appended to the resulting calibration file name.
5. Click Calibrate.
During the calibration process, a progress bar appears at the
bottom of the Calibration Tool window. The progress bar
indicates the calibration stages: printing the chart, measuring
it, and saving the measurements.
bottom of the Calibration Tool window. The progress bar
indicates the calibration stages: printing the chart, measuring
it, and saving the measurements.
When the calibration process is completed, a check mark
appears next to the selected screening methods.
appears next to the selected screening methods.
6. Click Close, when the calibration is completed and after all
green check marks appear.
The new calibration table (or tables) is added to the list of
calibration tables in the Calibrations window and the Media and
Color Manager in the Resource Center.
calibration tables in the Calibrations window and the Media and
Color Manager in the Resource Center.
To apply one of these calibration tables to your job, open the job
parameters window, and select Color > Calibration. Select from
the list the calibration table you want to apply to your job, and then
submit the job for printing.
parameters window, and select Color > Calibration. Select from
the list the calibration table you want to apply to your job, and then
submit the job for printing.
Creating a calibration table using the X-Rite i1
spectrophotometer
spectrophotometer
Requirements:
●
Your spectrophotometer must be connected to the USB port on
the CX print server.
the CX print server.
●
Install the driver when prompted for the first time connecting the
device. Refer to the spectrophotometer product documentation
for more details.
device. Refer to the spectrophotometer product documentation
for more details.
●
Make sure that your spectrophotometer is calibrated by placing
the spectrophotometer on its plate.
the spectrophotometer on its plate.
●
Make sure that the Print Queue is not suspended and is ready
for printing.
for printing.
●
Make sure the X-rite i1 spectrophotometer is selected in the
Preferences window.
Preferences window.
18
Chapter 3—Calibration