Xerox 75 MX User Manual
Product overview
Operator Guide
3-6
DocuTech/DocuPrint 75/90 and DocuPrint 75 MX
Figure 3-6. Tray 6 High Capacity Feeder
Reloading Paper
Open the cover and wait for the tray to lower in order to reload
paper. Fill the tray only to the maximum-fill line on the left side of
the tray. After reloading paper, close the cover to raise the tray.
paper. Fill the tray only to the maximum-fill line on the left side of
the tray. After reloading paper, close the cover to raise the tray.
The High Capacity Feeder can also accommodate 8.5 x 11 inch
(216 x 279 mm) drilled or long-edge paper between 16 to 32 lb
(75 to 120 gsm). Detailed information on using the tray guides to
change the stock size capability of Tray 6 is provided later in this
chapter under the heading, Changing the Tray 6 settings.
(216 x 279 mm) drilled or long-edge paper between 16 to 32 lb
(75 to 120 gsm). Detailed information on using the tray guides to
change the stock size capability of Tray 6 is provided later in this
chapter under the heading, Changing the Tray 6 settings.
Tray guides and loading paper
Do not open a tray that is in use, a paper jam may result.
Instead, before opening a tray, disable the tray in the Printer
Manager. After loading the paper, enable the tray in the Printer
Manager.
Instead, before opening a tray, disable the tray in the Printer
Manager. After loading the paper, enable the tray in the Printer
Manager.
Performance capabilities
Performance capabilities for various paper types loaded in
specific trays are given in the chapter, Paper and other stock.
specific trays are given in the chapter, Paper and other stock.
Tray 6
High
Capacity
Feeder
Capacity
Feeder