Xerox 75 MX User Manual
Operator Guide
Product overview
DocuTech/DocuPrint 75/90 and DocuPrint 75 MX
3-7
Loading paper in Trays 1-4
1. Pull out the paper tray.
Refer to the tray labels as you load the paper neatly in the
tray. Make sure that the left edge of the paper stack is against
the bar that is located on the left-hand edge of the tray, as
shown in the top portion of
tray. Make sure that the left edge of the paper stack is against
the bar that is located on the left-hand edge of the tray, as
shown in the top portion of
Do not load paper
above the maximum fill line.
Figure 3-7. Loading Trays 1-4
2. Ensure that the paper tray edge guides are against the top,
bottom, and side edges of the paper. If the paper size is
being changed, adjust the guides as necessary, as shown in
the bottom portion of
being changed, adjust the guides as necessary, as shown in
the bottom portion of
3. Push in the paper tray.
4. If the Printer Manager programming for the tray does not
match the guide settings, correct the programming. Refer to
the DocuSP on-line help for information on changing the
programming.
the DocuSP on-line help for information on changing the
programming.
NOTE: For information about how to load specific types of
paper or other stock, refer to the chapter, Paper and other stock.
paper or other stock, refer to the chapter, Paper and other stock.
Loading paper in the Bypass Tray (Tray 5)